- 12 Volt 10 Ah battery
- CCA: 160
- 10 Amp Hour @10 hr rate
- AGM lead acid battery. Sealed, Maintenance-Free
- Ships fully charged ready to install
- Environmentally friendly, 100% recyclable
- Vibration Resistant Design
- Fully Charged out of the box
- New bolts included
*Picture is approximate representation of the item. Color and brand may vary.
Note: Please check dimensions and terminal configuration to ensure this is the proper battery for your application.
We recommend the charger below to maintain this battery when it is not in use.
I purchased this batter for my ‘04 Ducati Mulitstrada. I had looked just about everywhere to try and find a replacement battery as the sizing is very specific to this bike. I had no luck at local shops or stores. I was able to find the battery online from some other retailers, but their prices were outrageous. I’m very happy to have stumbled upon Battery Mart as they saved me around $100 from what I would have spent for the same battery elsewhere. It arrived quickly and was packaged perfectly. I was very excited to get back out on the road.
Fits my 2000 Yamaha v star 650 custom . It has 200 CCA compared to the 85 CCA of my old battery.
I got it quickly with no issues! Thanks
easy to navigate site and find what you need , product in stock, fast shipping , item as described ,right fit . not the first buying battery from battery mart, always happy ..
Does the job. The only feedback for improvement is to make the nut that holds the battery cable to the battery thicker so they don't fall out when trying to install them, and make the screw slightly longer to accodmodate those of us who have our trickle charger leads attached as well. The screws weren't long enough and I couldn't connect the trickle charger as a result. Otherwise, good value and buy.
My specific bike did not popup on the website, so I chose a bike with the same engine and compared the battery size and specs. I will say the battery showed up fast, but the terminals were not the same size, and I had to dremel out the holes to get the bike lugs to fit the receivers. From the center to the hole receiver to the lug was off by 1/8th of an inch. That was not the frustrating part though, the most frustrating part was figuring out that was the issue. My battery is located under the seat and a little bit under the gas tank which made for an interesting install. It wasn't until after I removed the lug from the bike and got to measuring until I figured this out. The terminals on the battery mart battery are not the best quality, but we will see how long this lasts.
Good price for the battery but the lugs should have been on the terminals. They are supposed to send me another set