Scissor Lift Battery Chargers

What You Need to Know About Scissor Lift Chargers

Scissor lifts run hard, and their batteries take a beating. A charger that's underpowered, the wrong voltage, or just old and worn out won't fully recharge your battery bank, and that shows up as shorter run times, slower lifts, and batteries that wear out before their time. The right charger does more than top off a battery. It protects your investment and keeps your lift ready to work when you need it.

Most compact scissor lifts run on a 24-Volt system, usually built from four 6-volt batteries wired together. Larger scissor lifts and most boom lifts step up to a 48-Volt system. Getting this number right matters. A charger that doesn't match your lift's voltage won't charge the battery properly, and in some cases can damage it.

• Warehouse and fleet operators who need lifts charged and ready between shifts
• Rental yards maintaining multiple lift brands and voltage systems
• Construction and maintenance crews replacing a worn or failing OEM charger

How to Choose the Right Scissor Lift Charger

A few details separate the right charger from one that will leave you stranded mid-shift:

• Voltage: Match the charger to your battery bank exactly, either 24V or 48V. There's no in-between.
• Amp rating: Higher amperage charges faster, but it needs to match what your battery bank can safely accept. Most scissor lift batteries fall in the 15A to 25A range.
• Connector type: Genie, JLG, and Skyjack lifts don't all use the same plug. An OEM-correct connector means you can install the charger without rewiring anything.
• Battery chemistry: Standard flooded lead-acid batteries and AGM/gel batteries charge differently. Make sure your charger is rated for the battery type in your lift.

Our lineup is built mostly around Dual Pro Eagle Performance chargers from Pro Charging Systems, in 24V and 48V models from 15A to 25A, each configured with the correct OEM connector for specific Genie, JLG, and Skyjack lifts. We also carry Quick Charge chargers for Genie and Skyjack lifts. If you're not sure which one matches your lift, our contact us page connects you with someone who can help you find the right fit before you order.

Frequently Asked Questions

Do I need a 24V or 48V charger for my scissor lift?

A: It depends on your battery bank, not the size of your lift. Most compact scissor lifts use a 24-Volt system built from four 6-volt batteries. Larger scissor lifts and boom lifts often use a 48-Volt system. Check your lift's manual or the label on your existing charger to confirm before ordering.

How do I know if a charger will fit my Genie, JLG, or Skyjack lift?

A: Match the voltage, amp rating, and connector type to your lift's original charger, or cross-reference the OEM part number if you have it. Each charger listing includes the models and part numbers it replaces. If you're still not sure, reach out through our contact us page before you order. We also accept returns within 60 days if it turns out you need a different model.

Is installation plug-and-play, or do I need an electrician?

A: Our Dual Pro and Quick Charge units are built as drop-in replacements with the same OEM-style connector as your original charger, so most customers can swap the old charger for the new one without rewiring or calling in an electrician. Just unplug the old charger and plug in the new one.

Can I operate my scissor lift while it's charging?

A: No. Scissor lifts are designed to stay parked and powered down while charging, and most models include an interlock that prevents lift function while the charger is connected. Always disconnect the charger fully before operating the lift.

How long does it take to fully charge a scissor lift battery?

A: A full charge typically takes 8 to 12 hours from a deeply discharged battery bank, though this varies with your charger's amp rating and how depleted the batteries are. Charging overnight after a full shift is the most common approach for keeping a lift ready the next day.