MADE IN THE USA!Product Specifications for Dual Pro i2420OBRMLIFT Eagle Performance 24V 20A Scissor Lift Charger
| BM Part #: | I2420OBRMLIFT |
|---|---|
| Made In: | U.S.A. |
| Voltage: | 24 Volt |
| Charging Rate: | 20 Amp |
| Length: | 9" |
| Width: | 8.5" |
| Height: | 5.75" |
| Shipping Weight: | 22.00Lbs |
| Warranty: | 3 Year Factory Direct |
Pro Charging Systems DeltaView Link App allows you to access pertinent information from your iOS or Android mobile device. DVL provides quick and easy verification that your Lift/Golf Cart/Scrubber/LSV is fully charged and gives you instant access to the charging history data. DVL can assist in making service calls much more efficient, even eliminating some calls all together, which saves you time and money.
Download the DeltaView Link App:
- This item is not eligible for free shipping.
- Made in the USA. Why it matters:
- Superior craftsmanship; rigorously tested; high-quality parts.
- Plug-and-Play Replacement: Ships with all connectors and cables included for direct installation on compatible JLG, Genie, and Skyjack scissor lifts — no wiring modifications required.
- DeltaVolt 5-Stage Charging: Advances batteries through a full finishing stage before switching to float maintenance, delivering a more complete charge than standard chargers.
- Automatic Battery Type Detection: Self-configures for flooded lead-acid, AGM, or gelled electrolyte batteries — no manual setup needed.
- Temperature-Compensated Charging: Adjusts the charge profile based on ambient temperature to protect battery health across a range of working conditions.
- 5 LED Status Indicators: Gives operators a clear, real-time view of charge status and battery level right on the unit.
- USA-Made and Fully Repairable: Built by Pro Charging Systems with a rugged, water-resistant aluminum housing and a design that supports repair rather than replacement.
Product Description
Need faster charging? We also carry the Dual Pro i2425OBRMLIFT 24V 25A version — same Eagle Performance technology, higher output for larger fleets and heavier use.
Keeping rental equipment on the job comes down to one thing: knowing the batteries will be ready when the lift is needed. The Dual Pro i2420OBRMLIFT is a 24-volt, 20-amp on-board charger built specifically for that responsibility. It's a direct plug-and-play replacement for OEM chargers on JLG, Genie, and Skyjack scissor lifts, and it ships with all connectors and cables needed for installation.
Manufactured in the USA by Pro Charging Systems, the i2420OBRMLIFT is part of the Eagle Performance Series — chargers engineered for the rigors of industrial equipment and rental fleet use.
Five Stages of Charging, One Less Thing to Worry About
The i2420OBRMLIFT uses DeltaVolt technology to run batteries through a 5-stage charging process. Where a basic charger stops at surface charge, the Eagle Performance Series continues through a finishing stage to ensure the battery reaches a full, accurate state of charge. Once complete, the charger automatically shifts into float maintenance mode. If the battery voltage drops to a preset threshold, the charge cycle restarts on its own — no manual intervention needed.
The charger automatically identifies your battery chemistry and adjusts its charging profile accordingly. Whether you're running flooded lead-acid (wet cell), AGM, or gelled electrolyte batteries, the i2420OBRMLIFT handles the configuration itself. Built-in temperature compensation ensures that charge quality holds up regardless of ambient conditions, from a cold storage facility to a hot outdoor work site.
Easy to Monitor, Easy to Trust
Five LED indicators on the front of the unit give operators a clear, at-a-glance view of charging status and battery level — no guesswork about whether a lift is ready to go. Additional safeguards built into the charger include:
- Reverse polarity protection with spark-free hookup
- Fan cooling for extended charge cycles
- Water-resistant aluminum housing for tough-duty environments
Drop-In Replacement for OEM Units
The i2420OBRMLIFT is a direct replacement for JLG OEM charger part numbers 0400170, 0400177, and 0400204. For Genie lifts, it replaces part numbers 66412 and 105739. For Skyjack lifts, it replaces part number 128537AH. All required cabling and connectors are included, making installation a straightforward swap.
Compatible Scissor Lift Models
Genie: DLP-25S, DLP-30S, DLP-35S, GR-12, GR-15, GR-20, GS-1530, GS-1930, GS-2032, GS-2046, GS-2632, GS-2646, GS-3232, GS-3246, TZ-34/20
JLG: 1532E2, 1532E3, 1932E2, 1932E3, 2032E2, 2033E3, 2046E3, 2632E2, 2646E2, 2646E3, 2658E3, 3446E2
Skyjack: 3015, 3215, 3219, 3220, 3226, 4620, 4626, 4632, 4832, 6826, 6832
Built for the Job Site, Not the Recycling Bin
At 7.75" x 8.50" x 7.10" and 19 lbs, the i2420OBRMLIFT is compact enough to mount cleanly on a wide range of equipment. And unlike throw-away chargers, this unit is fully repairable — a design philosophy Pro Charging Systems has built into the Eagle Performance Series from the start. It's a better long-term value, and a better choice for operations that take equipment maintenance seriously.
Frequently Asked Questions
Which OEM chargers does the i2420OBRMLIFT replace?
This charger is a direct replacement for JLG OEM part numbers 0400170, 0400177, and 0400204. It also replaces Genie part numbers 66412 and 105739, and Skyjack part number 128537AH.
What battery types does this charger support?
The i2420OBRMLIFT automatically detects and charges flooded lead-acid (wet cell), AGM, and gelled electrolyte batteries. No manual battery type selection is required.
Does installation require any special wiring?
No. This is a plug-and-play replacement designed to drop directly into compatible lift models. All necessary cables and connectors are included in the box.
What is the difference between this charger and the i2425OBRMLIFT?
The i2420OBRMLIFT outputs 20 amps, while the i2425OBRMLIFT outputs 25 amps. Both use the same Eagle Performance Series DeltaVolt technology and share the same compatibility list. The higher-output 25A version is a good fit for operations that prioritize faster turnaround between charges.
What happens if the battery discharges after it's fully charged?
The charger monitors battery voltage and will automatically restart the charge cycle if the voltage drops to a preset threshold. No manual reset is needed.
Can this charger be repaired if something fails?
Yes. The i2420OBRMLIFT is designed to be serviced and repaired, not discarded. Pro Charging Systems supports repair of their Eagle Performance Series chargers.
Cross Reference & Compatibility
- DLP-25S
- DLP-30S
- DLP-35S
- GR-12
- GR-15
- GR-20
- GS-1530
- GS-1930
- GS-2032
- GS-2046
- GS-2632
- GS-2646
- GS-3232
- GS3246
- TZ-34/20
- 1532E2
- 1532E3
- 1932E2
- 1932E3
- 2032E2
- 2033E3
- 2046E3
- 2632E2
- 2646E2
- 2646E3
- 2658E3
- 3446E2
- 3015
- 3215
- 3219
- 3220
- 3226
- 4620
- 4626
- 4632
- 4832
- 6826
- 6832
Customer Reviews
For shop lift, quick charging
