Product Specifications for TOPDON V4000 HD 12V/24V 4000A Heavy-Duty Jump Starter
| BM Part #: | V4000HD |
|---|---|
| Voltage: | 12/24 Volt |
| Capacity: | 64 Ah |
| Energy Capacity: | 204.8 Wh |
| Length: | 11.93" |
| Width: | 4.33" |
| Height: | 8.74" |
| Shipping Weight: | 5.00Lbs |
| Warranty: | 1 Year |
| Rechargeable: | Yes |
| Peak Amps: | 12V/4000A (700A 2s) | 24V3000A (700A 2s) |
| Jumps Per Charge: | Up to 12V: 60 Up to 24V: 30 |
| Gas Engines: | Up to 16.0 Liters |
| Diesel Engines: | Up to 16.0 Liters |
| Flashlight Brightness: | 400 Lumen |
What's in the box:
- V4000 HD
- PD65W USB-C Cable
- 5V/2.4A USB-A Cable
- Power Adapter
- User Manual
- Dual-Voltage Detection: Automatically identifies your vehicle's 12V or 24V system before it delivers a jump.
- 4,000-Amp Peak Output: Starts gas and diesel engines up to 16 liters, from sedans to heavy trucks.
- LiFePO4 Battery: Lasts over 1,000 charge cycles without the swelling risk of older lithium packs.
- 7-Layer Safety Protection: Guards against reverse polarity, short circuits, and over-voltage on every connection.
- Tri-Mode LED Light: Switches between flashlight, strobe, and SOS for roadside visibility after dark.
- Fast USB-C Charging: Recharges fully in about 3.5 hours so it's ready for the next job.
Product Description
Are you tired of packing two jump starters because your fleet runs both 12V and 24V systems? The TOPDON V4000 HD ends that problem by handling both from a single unit.
One Jump Starter, Every Vehicle in the Fleet
Running a mixed fleet usually means owning a stack of jump starters — one for the pickup trucks, another for the semis. That gets expensive fast, and it's one more thing to keep charged and organized.
The V4000 HD solves it with automatic 12V and 24V detection. Connect the clamps and it reads the system voltage itself, then delivers up to 4,000A on 12V or 3,000A on 24V systems. Passenger cars, box trucks, buses, and diesel equipment up to 16 liters are all covered by one tool.
Built for Cold Mornings and Long Hot Shifts
A dead battery always seems to happen at the worst possible time. The V4000 HD is rated to start engines down to -10°F, and it keeps performing reliably up to 122°F, so it holds up whether you're on a frozen loading dock or a job site in July.
A Battery That Keeps Up With You
Inside is a 64,000mAh LiFePO4 battery, the same chemistry trusted for its long life and resistance to swelling or overheating. A full charge is good for up to 60 jumps at 12V or 30 jumps at 24V, and USB-C fast charging brings it back to 100% in about 3.5 hours, so it's ready before your next call comes in.
More Than a Jump Start
When you're not reviving a battery, the V4000 HD pulls double duty as:
- A power bank for phones, tablets, and other devices
- A 12V DC outlet for small tools and accessories
- A flashlight with steady, strobe, and SOS modes for roadside visibility
Seven layers of protection guard against reverse polarity, short circuits, and over-voltage, so anyone on the crew can hook it up with confidence, not just the shop's most experienced tech.
Stop carrying two jump starters when one will do the job. Add the TOPDON V4000 HD to your cart and keep every vehicle in your fleet ready to start.
Frequently Asked Questions
Will the V4000 HD work on my 24V truck, or just cars?
A: Yes. The V4000 HD automatically detects whether your vehicle runs a 12V or 24V system and adjusts its output accordingly, up to 4,000A on 12V and 3,000A on 24V. It covers everything from passenger cars to buses and diesel engines up to 16 liters, so you don't need a separate unit for each voltage.
How do I know if my vehicle uses a 12V or 24V system?
A: Most passenger cars, pickups, and light trucks run 12V. Buses, larger commercial trucks, and some diesel equipment often run 24V, usually identifiable by two 12V batteries wired in series. Check your owner's manual or look at the battery compartment if you're not sure before jump-starting.
How long does it take to charge, and how many jumps will I get?
A: A full charge takes about 3.5 hours using the included USB-C cable. Once charged, you'll get up to 60 jump starts on a 12V system or 30 jump starts on a 24V system before it needs a recharge.
What happens if I connect the clamps in the wrong order?
A: The V4000 HD includes reverse polarity protection as part of its 7 layers of safety features. If the clamps are connected incorrectly, the unit won't send power through, protecting both your vehicle's electrical system and the jump starter itself.
Can I use the V4000 HD for anything besides jump-starting?
A: Yes. It also works as a portable power bank for charging phones and tablets, a 12V DC outlet for small accessories, and an LED flashlight with steady, strobe, and SOS modes for roadside emergencies.
