Product Specifications for Tenergy 02460 Arlo Certified 4-Bay Charger for 3.7V RCR123A Li-ion Batteries with LCD Display
| BM Part #: | 02460 |
|---|---|
| Voltage: | 3.7 Volt |
| Charging Rate: | 400 mA |
| Length: | 3.63" |
| Width: | 0.94" |
| Height: | 3.88" |
| Shipping Weight: | 0.30Lbs (4.8 oz) |
| Warranty: | 1 Year |
| Product Manual: | Download |
| Certifications: | UL, CE, FCC, and California CEC |
- 4 Independent Channels: Charge one to four 3.7V Li-ion RCR123A batteries at a time.
- Real-Time LCD Screen: Check voltage and charging status at a glance, with no guessing.
- Arlo Certified: Recharges Tenergy 750mAh and 650mAh batteries made for Arlo cameras.
- Fast Charging: Refills 750mAh batteries in about 2.5 hours and 650mAh batteries in about 2.
- Certified Safe Design: Meets UL 1310, CE, FCC, and California CEC standards with a 12-month warranty.
Product Description
Never Be Caught With Dead Camera Batteries
Tired of climbing a ladder to swap Arlo camera batteries? Keep a spare set charged and ready with this Arlo certified RCR123A charger. Pop in the dead ones, swap in the fresh ones, and you're done in minutes.
It's designed for 3.7V Li-ion RCR123A batteries, including Tenergy's 750mAh and 650mAh cells made for Arlo cameras. Because each slot works separately, you can top up a single battery or the whole set.
It runs on 5V USB input, so it's easy to set up near an outlet or a computer. Skip the stream of disposable batteries and save money over time.
Just remember to use it only with the batteries it was designed for (see the FAQs below). Ready to simplify camera upkeep? Add the Tenergy 02460 to your cart today.
![[4 Pack] Tenergy 3.7V RCR123A Protected Li-Ion Rechargeable Batteries (for Arlo Security Cameras)](graphics/00000001/17/34253-big_125x125.jpg)
Frequently Asked Questions
Which batteries can I charge with this charger?
A: Any 3.7V Li-ion RCR123A rechargeable battery, including Tenergy's 750mAh and 650mAh cells for Arlo cameras. Do not charge LiFePO4 or other chemistries, and never charge one-time-use CR123A batteries.
Which Arlo cameras use these batteries?
A: Tenergy's Arlo certified batteries are compatible with Arlo models VMC3030, VMK3200, VMS3130, 3230, 3330, 3430, and 3530.
Can I charge regular CR123A batteries in it?
A: No. Never charge one-time-use lithium CR123A or CR123 batteries, or any other non-rechargeable or non-Li-ion battery. Doing so can cause fire or explosion.
What do I use to power the charger?
A: It takes 5V DC input through USB. We recommend a 5V adapter rated at 2A or higher.
Can I use it outdoors or in a garage?
A: It is made for indoor use only. Keep it away from heat, rain, humidity, and any liquid splashes.
