Product Specifications for Schumacher CR9 Charge ’n Ride 3A 6V/12V Ride-On Toy Battery Charger and Maintainer
| BM Part #: | CR9 |
|---|---|
| Voltage: | 6/12 Volt |
| Charging Rate: | 3 Amp |
| Input Voltage: | 120V AC |
| Length: | 6.77" |
| Width: | 2.73" |
| Height: | 3.18" |
| Shipping Weight: | 3.00Lbs |
| Warranty: | 1 Year Limited |
| Cable Reach: | 5.3 ft |
| Product Certifications: | DOE, FCC Certified |
What's in the box:
- (1) Schumacher Charge N Ride CR9 6/12V 3A Ride On Toy Charger
- (5) Ride On Toy Connectors
- (1) Owner's Manual
- Auto Voltage Detection: Senses 6V or 12V batteries for you, so there's no switch to set.
- 3-Amp Charging: Recharges ride-on batteries up to three times faster than most chargers.
- Maintain Mode: Keeps a full battery topped off, so it's ready whenever playtime starts.
- 5 Included Connectors: Matches popular ride-on toy plugs, with no extra parts to buy.
- LED Indicators: Shows power, charging, 80% ready, full charge, and bad battery at a glance.
Product Description
Get Back to Playtime Fast
Is your child's ride-on toy dying mid-adventure, or sitting dead while the stock charger crawls along? The Schumacher CR9 ride-on toy charger is a faster, simpler fix for 6V and 12V batteries.
Most charges are quick. A small 5Ah battery reaches 80% in about 2 hours, and a larger 15Ah battery gets there in about 5. Times vary with how drained the battery is.
It's a great fit if you:
- Have more than one ride-on toy in the garage
- Need to replace a lost or slow original charger
- Want a charger you can plug in and let do its job
Frequently Asked Questions
Will the CR9 work with my child's ride-on toy?
A: It works with 6V and 12V lead-acid ride-on batteries. The five included connectors cover Action Wheels, Kid Trax/Rollplay, Peg Perego, Power Wheels, and Pulse/Dynacraft/Huffy/Hyper/Razor. Match the connector to your toy's battery plug. Note that the Kid Trax/Rollplay connector is for 6V, while the Peg Perego and Power Wheels connectors are for 12V. It is not designed for 24V batteries.
Do I need to select 6V or 12V?
A: No. The CR9 detects your battery's voltage automatically, so there is no setting to choose. There is also no on/off switch. It starts when you plug it into the wall outlet and a battery is connected.
How long does it take to charge a ride-on toy battery?
A: A 5Ah battery reaches 80% in about 2 hours and 100% in about 4 hours. A 15Ah battery takes about 5 hours to reach 80% and about 9 hours to reach 100%. Times vary depending on how drained the battery is.
How do I know when the battery is ready?
A: When the green Charging/Charged light starts flashing, the battery is about 80% charged and safe to use. When that light turns off, the battery is full and the charger switches to maintain mode. For longer battery life, give the battery a full charge after two quick charges in a row.
Do I charge the battery inside the toy?
A: It's best to remove the battery from the vehicle and make sure all of the toy's accessories are off. Connect the matching cable connector to the charger first, then to the battery, then plug the charger into the wall. If the red Bad Battery light comes on, stop charging and have the battery checked or replaced.
