Product Specifications for Replacement Porter Cable Power Tool Battery (19.2V, 2.0Ah, NiCd)
| BM Part #: | TOOL-154 |
|---|---|
| Voltage: | 19.2 Volt |
| Capacity: | 2000 mAh |
| Type: | NiCd |
| Shipping Weight: | 3.00Lbs |
| Warranty: | 6 Month |
Product Description
This NiCd Replacement Battery is 100% compatible with the Porter Cable 8823. Our batteries and accessories are made with high quality parts and are guaranteed to meet or exceed the original equipment manufacturers specifications at a reduced price. All batteries are tested for 100% Quality Control Assurance.
Cross Reference & Compatibility
- Porter Cable 884
- Porter Cable 8823
- Porter Cable 8830
- Porter Cable 8923
- Porter Cable 9826
- Porter Cable 889573
- Porter Cable 904301
This battery can be used in these models:
- Porter Cable 643 Type 1 Cordless Jig Saw
- Porter Cable 643 Type 2 19.2 Volt Cordless Jig Saw
- Porter Cable 837 Type 1 19.2V Cordless Reciprocating Saw
- Porter Cable 837 Type 2 19.2V Cordless Reciprocating Saw
- Porter Cable 845 Type 1 19.2V Cordless Circular Saw
- Porter Cable 845 Type 2 19.2V Cordless Circular Saw
- Porter Cable 826 Type 1 Cordless 19.2V Drill
- Porter Cable 9837 Type 1 Cordless Reciprocating Saw Kit
- Porter Cable 9837 Type 2 Cordless Reciprocating Saw Kit
- Porter Cable 9845 Type 1 Cordless Circular Saw Kit
- Porter Cable 9845 Type 2 Cordless Circular Saw Kit
- Porter Cable 884 Type 1 19.2v Cordless Driver/Drill
- Porter Cable 884 Type 2 19.2v Cordless Driver/Drill
- Porter Cable 887 Type 1 19.2v Cordless Hammer Drill
- Porter Cable 887 Type 2 19.2v Cordless Hammer Drill
- Porter Cable 984 19.2 Volt Cordless Drill/Driver
- Porter Cable 987 19.2 Volt Cordless Hammer Drill/Driver
Customer Reviews
I bought the higher amp hour rated batteries because I wanted the charge to last longer (run the drill longer when driving screws). I had purchased other so called replacement batteries for this drill. They did not hold a charge very long and were useless. I have charged one of the new Batteries from battery mart and so far it is full of power. Time will tell. Thank you for the choice of a much better product.
We like the battery very much. We had lost hope that we would be able to continue using our old Porter Cable drill since they no longer make this drill or make batteries for it anymore. Both the battery and the drilll are strong again!
Received the two batteries I ordered and immediately went to charge one of the batteries. Noticed that after about 10-15 minutes the "Fully Charged" light appeared. Went to use it and it lasted about 5 minutes. I then put it back in the charger.
It took quite a bit longer this second time and held the charge for a number of hours
Good.
Just a completely fantastic product.
When storing the battery , drill and charger in the case, the battery is slightly larger and lid does not close.
Allows me to use my tools longer and not replace them because there are battery replacements.
