OptiMate MONITOR O-126, Battery status / charge System Monitor for 12V / 12.8V, with AUTO/DIN Plug
Item #: O-126 |
Limited Stock Available
Be the first to Write a Review
Specs
Product Specifications for OptiMate MONITOR O-126, Battery status / charge System Monitor for 12V / 12.8V, with AUTO/DIN Plug
Specifications:
| BM Part #: | O-126 |
|---|---|
| Voltage: | 12 Volt |
| Charging Rate: | n/a |
| Length: | 5.75" |
| Width: | 2" |
| Height: | 8" |
| Shipping Weight: | 0.24Lbs (3.84 oz) |
| Warranty: | 3 Years Factory Direct |
Features:
- SAE to DIN/AUTO 12V socket adapter with state of charge monitor that plugs directly into your motorcycle, ATV/SxS, car, pick-up truck or boat's 12V powersports - Adapter with 24/7 battery status at a blink of an LED!
- Ideal for 12V lead-acid & 12.8V lithium LFP (LiFePO4) batteries.
- Fits both auto and bike sockets.
- 2 automatic Modes – Battery charge level monitor (single LED blink mode) & Charging system test (arrow mode).
- Vehicle storage: 4 LEDs cover 'full to empty' voltage range of all 12V batteries, including higher voltage AGM for power sport (3th √ LED ≥ 12.7V). LED matching charge level blinks every 3 seconds (long term draw less than 0.2mA).
- Vehicle running: LED arrow mode activates when charge voltage reaches ideal charging voltage; up to minimum 13.5V or ideal range 14V+.
- SAE connection system fits any SAE standard 2-pin connector, includes in-line seal that mates with OptiMate SAE – Premium quality!
Description
Product Description
Smart battery lead that measures voltage; monitors charge of a stored 12V lead-acid & 12.8V lithium-ion battery and confirm if the vehicle charging system is working correctly. Fits any 21mm AUTO and 12mm DIN socket.
LENGTH: 10".
BATTERY CONNECTOR: 21mm AUTO and12mm DIN plug.
CHARGE CONNECTOR: 2-pin SAE, protected from dirt and liquid with rubber sealing cap and shroud.
CABLE RATING: 18AWG (0.82mm2) SPT-2W.
FUSE:10 Amp (inside the connector).
USE: -40°F very low temperature, remains flexible at 'below freezing' temperatures.
STYLE: Fully enclosed electronic circuitry with 4 LEDs, SAE charge connector with rubber sealing cap & shroud.
Replaces
Cross Reference & Compatibility
The OptiMate MONITOR O-126, Battery status / charge System Monitor for 12V / 12.8V, with AUTO/DIN Plug has been cross-referenced to be compatible with or replace these OEM part numbers and models:
O-126
Reviews
