Schauer JAC0224 Charger: 24 Volt, 2 Amp with Clips
Product Specifications for Schauer JAC0224 Charger: 24 Volt, 2 Amp with Clips
|BM Part #:||JAC0224-C|
|Warranty:||2 Year Factory Direct|
- World-Wide Universal AC Input 90 - 260 volts, 50/60Hz.
- Charge control: modified constant current charge to a constant finishing voltage then to a float standby.
- Current limiting.
- Fully automatic 3 stage charger can be left on the battery indefinitely.
- For any type lead acid battery, including conventional, maintenance free, deep cycle, gelled-type, valve regulated batteries.
Intelligent chargers follow battery impedance to end of charge cycle for all battery types. Fully automatic.Red LED indicates AC power on, yellow LED indicates battery is charging, green LED indicates float mode. Aluminum case.
I decided to upgrade my son's ride-on from 12V to 24V.....and had a very hard time finding a charger that would accommodate this setup. Of the ones I did find, they were in the range of $100+ so when I came across this charger it looked perfect. I received the product in a few days, faster than they said it would be out, and connected it to my setup and it worked perfectly. The charger has a small LED on it that turned red instantly, which meant it was charging. I checked on it a few hours later and it had switched to green which meant it was fully charged and then remained in the "float" charge so it prevented battery drain. The clips and setup were super simple as it was just a plug into the wall and connect the two battery terminals. For clarification, I have two 12V batteries connected in series so I connected the positive lead to the positive side of battery one and the negative lead to the negative side of battery two. Worked like a charm and due to the 2Ah charging ability, the ride-on charges fully within 6-8 hours when completely drained. I usually just plug it in overnight and it is good to go the next day. Would highly recommend and the build quality is great!
Just as advertised, works great