Product Specifications for Extended Capacity Battery for Philips IntelliVue MP & MX Series | DR202P, Replaces M4605A
| BM Part #: | DR202P |
|---|---|
| Voltage: | 10.8 Volt |
| Capacity: | 7800 mAh |
| Type: | Li-Ion |
| Length: | 5.88" |
| Width: | 3.50" |
| Height: | 0.78" |
| Shipping Weight: | 1.00Lbs |
| Warranty: | 1 Year |
- Compatible with the full Philips IntelliVue patient monitor family — fits MP5, MP20, MP30, MP40, MP50, MP60, MP70, MP80, MP90, MX400, MX450, MX500, MX550, M8000, M8001A, M8002A, M8100, TC30, TC70, FM20, FM30, ELI 380, and 740 Select; direct M4605A equivalent replacing OEM part numbers 989803135861, M2702A, M2703A, M8105A, and related variants.
- Extended capacity: 7800mAh across 9 cells — higher capacity than the standard M4605A OEM battery, delivering longer runtime between charges for sustained monitoring in ICU, general care, labor & delivery, and cardiac monitoring environments.
- Intelligent battery pack with integrated fuel gauge — smart circuit communication via 5-position connector provides accurate state-of-charge reporting to IntelliVue monitors; fuel gauge indicator enables charge verification independent of the host device.
- Ships fully charged and tested — ready for immediate clinical deployment — no initial charge cycle required; each unit fully tested before shipment to confirm cell health, smart circuit communication, and pack integrity.
- Assembled in the USA to the highest quality standards — premium Li-Ion cells with primary and secondary safety protection circuitry; 12-month warranty.
Product Description
DR202P Extended Capacity Battery for Philips IntelliVue Patient Monitors
The DR202P is a 10.8V 7800mAh extended capacity Lithium-Ion intelligent battery pack built by Energy+ in the USA for the Philips IntelliVue patient monitor family. It is a direct M4605A equivalent — replacing OEM part numbers M4605A and 989803135861 — and ships fully charged and tested for immediate clinical deployment. At 7800mAh across 9 cells, it delivers higher capacity than the standard OEM battery for longer runtime between charges.
Compatible Philips IntelliVue Equipment
The DR202P covers a broad range of Philips patient monitoring and diagnostic platforms:
IntelliVue Patient Monitors
- MP Series: MP5, MP20, MP30, MP40, MP50, MP60, MP70, MP80, MP90
- MX Series: MX400, MX450, MX500, MX550
- M Series: M8000, M8001A, M8002A, M8100
- TC Series: TC30, TC70
Fetal & Maternal Monitoring
- FM Series: FM20, FM30
Cardiac & Vital Signs
- ELI 380 ECG system
- 740 Select Vital Signs Monitor
Confirm your monitor model and OEM battery part number against your equipment documentation before ordering. OEM part numbers covered include: M4605A, MB4605A, 989803135861, M2702A, M2703A, M8003A, M8004A, M8105A, M8105AS, M8105AT, and Philips part numbers 865297, 866060, 866062, 866064, 866066.
Extended Capacity Design
The DR202P uses 9 high-performance Li-Ion cells to deliver 7800mAh at 10.8V — higher capacity than the standard M4605A OEM battery. For hospital biomedical departments managing large IntelliVue fleets, this extended capacity translates to longer monitoring sessions between charges and reduced frequency of battery swaps in high-utilization environments.
Intelligent Battery Communication
The DR202P communicates via 5-position connector consistent with the M4605A platform standard, providing full smart battery data to IntelliVue monitors including state-of-charge, cycle count, and battery health status. The integrated fuel gauge indicator allows charge level verification independent of the host monitor — useful for pre-shift checks and battery inventory management.
Frequently Asked Questions
What Philips IntelliVue monitors is the DR202P compatible with?
The DR202P is compatible with the Philips IntelliVue MP5, MP20, MP30, MP40, MP50, MP60, MP70, MP80, and MP90 patient monitors; MX400, MX450, MX500, and MX550 monitors; M8000, M8001A, M8002A, and M8100 monitors; TC30 and TC70; FM20 and FM30 fetal monitors; ELI 380 ECG; and the 740 Select Vital Signs Monitor.
Is the DR202P equivalent to the Philips M4605A?
Yes. The DR202P is a direct M4605A equivalent, replacing OEM part numbers M4605A and 989803135861 along with M2702A, M2703A, M8105A, M8105AS, M8105AT, M8003A, M8004A, and MB4605A. It uses the same 5-position connector and communicates full smart battery data to IntelliVue monitors.
How does the DR202P capacity compare to the OEM M4605A?
The DR202P is an extended capacity replacement at 7800mAh across 9 cells — higher than the standard M4605A OEM capacity. This provides longer runtime between charges in high-utilization monitoring environments.
Is the DR202P compatible with the Philips IntelliVue MP2?
The MP2 is not currently listed in the confirmed compatibility list for the DR202P. Contact us to verify compatibility for your specific MP2 configuration before ordering.
Does this battery ship charged and ready to use?
Yes. The DR202P ships fully charged and tested. No initial charge cycle is required — it is ready for immediate clinical deployment upon arrival.
Is this an OEM Philips battery?
No. The DR202P is an aftermarket replacement battery manufactured by Energy+ in the USA. It is designed to meet or exceed the specifications of the original M4605A OEM battery and is not an official Philips product.
What is the warranty?
The DR202P carries a 12-month warranty.
Which part numbers does the DR202P replace?
M4605A, MB4605A, 989803135861, M2702A, M2703A, M8003A, M8004A, M8105A, M8105AS, M8105AT, and Philips part numbers 865297, 866060, 866062, 866064, and 866066.
Cross Reference & Compatibility
- Philips 865297
- Philips 866060
- Philips 866062
- Philips 866064
- Philips 866066
- Philips 989803135861
- Philips M2702A
- Philips M2703A
- Philips M4605A
- Philips M8001A
- Philips M8002A
- Philips M8003A
- Philips M8004A
- Philips M8105A
- Philips M8105AS
- Philips M8105AT
- Philips MB4605A
This battery can be used in these models:
- Philips 740 Select Vital Signs Monitor
- Philips ELI 380 ECG
- Philips FM20
- Philips FM30
- Philips Intellivue 30
- Philips Intellivue 60
- Philips Intellivue M8000
- Philips IntelliVue M8001A
- Philips IntelliVue M8002A
- Philips IntelliVue M8100
- Philips IntelliVue MP20
- Philips IntelliVue MP30
- Philips Intellivue MP40
- Philips Intellivue MP5
- Philips IntelliVue MP50
- Philips Intellivue MP60
- Philips IntelliVue MP70
- Philips Intellivue MX400
- Philips IntelliVue MX400 Patient Monitor
- Philips Intellivue MX450
- Philips Intellivue MX500
- Philips Intellivue TC30
- Philips Intellivue TC70
- Philips M8001A
- Philips M8002A
- Philips M8100
- Philips MP20
- Philips MP30
- Philips MP40
- Philips MP50
- Philips MP60
- Philips MP70
- Philips MP80
- Philips MP90
- Philips System M4605A
- Philips System MP20
- Philips System MP30
- Philips System MP40
- Philips System MP5
- Philips System MP50
- Philips System MX400
