Product Specifications for Dakota Lithium 24V 10A LiFePO4 Battery Charger
| BM Part #: | DLCH-24V10 |
|---|---|
| Brand: | Dakota Lithium |
| Voltage: | 24 Volt |
| Charging Rate: | 10 Amp |
| Shipping Weight: | 4.00Lbs |
| Warranty: | 60 Day Return |
- Correct 24V LiFePO4 Charging Profile: Outputs at 28.8V — the recommended charging voltage for 24V LiFePO4 batteries — delivering a full charge every time while protecting cell health and long-term capacity.
- 10A Output for a Wide Range of Battery Sizes: Charges at 10 amps, making it well suited for 24V batteries from 10Ah to 60Ah and beyond. Compatible with LiFePO4, Li-ion, and NCM lithium chemistries.
- Works with Series-Wired 12V Battery Pairs: Fully compatible with two Dakota Lithium 12V batteries wired in series to create a 24V system, covering dual-battery trolling motor setups, 24V marine systems, and more.
- Smart BMS Wake-Up Function: Automatically sends a restart signal to a Dakota Lithium BMS that has shut down due to a short circuit or over-discharge event — no manual reset required.
- Universal AC Input: Accepts 100–240V input at 50/60Hz, compatible with standard US household outlets and international power sources right out of the box.
- Simple LED Status Indicator: Red light confirms active charging; green light signals the battery is full. Alligator clip connections make hookup quick and straightforward.
Product Description
Running a 24V lithium system and need a reliable charger that speaks the right language? The Dakota Lithium 24V 10A LiFePO4 Battery Charger is purpose-built for lithium batteries, outputting at the correct 28.8V charging profile that 24V LiFePO4 systems require. It's a straightforward, dependable charger for anyone who wants to protect their battery investment and keep their setup ready to go.
The Right Charger for the Right Chemistry
This is worth understanding before you reach for whatever charger is on hand: 24V lead-acid chargers operate at a different voltage profile than what lithium batteries need. Using the wrong charger on a LiFePO4 battery won't necessarily destroy it outright, but it will reduce how much capacity it reaches on each charge and shorten its overall lifespan over time. The Dakota Lithium 24V 10A charger outputs at 28.8V — exactly what 24V LiFePO4 batteries are designed to receive — so you're getting a full charge every time while keeping the cells healthy for the long run.
This charger is compatible with LiFePO4, Li-ion, and NCM lithium battery chemistries. It is not recommended for lead-acid or SLA batteries.
Practical Charging Times for Real-World Use
At 10 amps of output, this charger is well suited for 24V battery setups ranging from compact single batteries to mid-size packs. To estimate how long a charge will take, simply divide your battery's amp hour (Ah) rating by 10. A 24V 10Ah battery charges in under an hour. A 24V 60Ah battery comes in at around 6 hours. For most users, that means plugging in overnight and waking up to a full battery — no babysitting required.
This charger also works with any two Dakota Lithium 12V batteries wired in series to create a 24V system, making it a natural companion for dual-battery trolling motor setups, 24V marine systems, and similar configurations.
Smart BMS Wake-Up Built In
If a Dakota Lithium battery's BMS has shut itself down in response to a short circuit or an excessive amp draw event, the battery can appear completely dead. This charger includes Smart BMS communication that sends a restart signal to the BMS as soon as it's connected, waking the battery back up without any manual intervention needed. It's a small feature that can save a lot of frustration in the field.
Simple Connections, Clear Status
The charger connects via alligator clips — clip black to the negative terminal, red to the positive, and plug into a standard outlet. A red indicator light confirms that charging is underway, and it switches to green when the battery reaches full capacity. No buttons to press, no settings to configure. The charger accepts input from 100 to 240V at 50/60Hz, so it works with standard US outlets and international power sources without any adapter needed.
For best long-term battery health, Dakota Lithium recommends keeping the charger's amp rating at or below one-third of the battery's total amp hour capacity. At 10 amps, this charger sits in that ideal range for most common 24V battery sizes, making it a solid choice for everyday charging rather than just emergency top-offs.
Frequently Asked Questions
What batteries is this charger compatible with?
A: This charger is designed for 24V lithium batteries, including LiFePO4 (lithium iron phosphate), Li-ion, and NCM chemistries. It also works with two 12V Dakota Lithium batteries wired in series to form a 24V system. It is not recommended for lead-acid, AGM, or SLA batteries, as those require a different charging profile.
How long will it take to charge my battery?
A: To estimate charge time, divide your battery's amp hour (Ah) rating by 10. For example, a 24V 20Ah battery will take approximately 2 hours, and a 24V 60Ah battery will take around 6 hours from a fully depleted state. If the battery has some charge remaining when you plug in, the actual time will be shorter.
Why does my lithium battery need a LiFePO4-specific charger?
A: LiFePO4 batteries require a specific charging voltage that differs from lead-acid chargers. For 24V systems, the correct charge voltage is 28.8V. Using a lead-acid charger may appear to work, but it won't bring the battery to its full capacity and will reduce its overall lifespan over time. This charger is calibrated specifically for 28.8V output, so your battery gets a proper, complete charge on every cycle.
What does the Smart BMS wake-up feature do?
A: Dakota Lithium batteries include a Battery Management System (BMS) that will automatically shut the battery down if it detects a short circuit or an unusually high amp draw. When that happens, the battery can look completely dead. Connecting this charger restores communication with the BMS and sends a restart signal, bringing the battery back to normal operation automatically — no tools or manual reset process required.
Can I use this charger if I'm outside the US?
A: Yes. This charger accepts AC input from 100 to 240V at 50 or 60Hz, which covers the standard power supply in the US, Canada, Europe, and most other countries. You may need a physical plug adapter for the wall outlet depending on your location, but no voltage converter is required.
Is it okay to leave this charger connected after the battery is full?
A: The charger will indicate a full charge by switching its indicator light from red to green. Once fully charged, it's best practice to disconnect the charger rather than leaving it connected indefinitely. For long-term storage, Dakota Lithium recommends storing LiFePO4 batteries at roughly 50% charge in a cool, dry location.
