MADE IN THE USA!Product Specifications for Associated Equipment KS401 Professional Heavy Duty Industrial Jump Starter with 7 ft DC Leads
| BM Part #: | KS401 |
|---|---|
| Made In: | U.S.A. |
| Voltage: | 12 Volt |
| Cold Cranking Amps: | 360 CCA |
| Capacity: | 22 Ah |
| Type: | Sealed Lead Acid |
| Shipping Weight: | 30.00Lbs |
| Warranty: | 1 Year |
| Product Manual: | Download |
| Peak Amp Output: | 1700 Amps |
| DC Leads: | 84" 4GA w/400A Steel Clamps |
| Adapters: | USB & 12V DC Power Ports |
| Internal Charger: | Automatic Internal 500mA |
- Made in the USA. Why it matters:
- Superior craftsmanship; rigorously tested; high-quality parts.
- 22Ah Sealed AGM Battery: Delivers 1,700 peak amps and 360 cold crank amps on demand.
- 7 ft Replaceable Cables: Set the unit on the ground and still reach the battery.
- Impact-Resistant Case: The rubber base absorbs drops and keeps the unit from sliding around.
- Built-In Digital Voltmeter: Checks battery and charging system voltage so you can spot problems fast.
- LED State-of-Charge Display: Shows the pack's charge level before you head out to a job.
- 12V Power Port and USB Port: Powers phones, accessories, and 12V devices when you're away from an outlet.
- Automatic Internal Charger: Plugs into AC power and can stay connected without overcharging.
Product Description
Dead battery, no second vehicle, and someone waiting on you? This heavy duty jump starter lets you handle it solo. Clamp on, flip the switch, and start the engine.
Built for Real Work, Not Just Emergencies
Tired of consumer jump packs that crack, die, or leave you guessing? The Associated KS401 is an industrial jump starter made for shops, fleets, and roadside calls.
It's designed and patented in St. Louis, with a body that shrugs off the bumps of daily use.
Where It Earns Its Keep
- Cars, pickups, and SUVs that won't start on a cold morning
- Lawn tractors, snow throwers, and other 12V equipment
- Fleet lots and shop bays where a second vehicle isn't handy
- Battery swaps, where it can help preserve radio presets and onboard computer memory
Ready When You Need It
Rain, snow, heat, or cold, the KS401 can be used in any weather. For best results, store it above 50°F.
Keep it plugged into AC power between jobs and it will be charged when you need it. If that's not possible, recharge it at least every six months. Letting it sit fully drained can permanently damage the battery.
Know What You're Getting
At 26 lbs, this is a carry-by-the-handle pack, not a pocket-sized unit. It's at its best on passenger vehicles, light trucks, and SUVs. If you regularly boost large trucks, make sure a 360 cold crank amp pack fits your needs.
Backed by a Name Pros Know
Associated Equipment covers the KS401 with a 1-year limited warranty. The cables and battery are replaceable parts, so one worn-out piece doesn't mean buying a whole new unit.
Stop waiting on a second vehicle. Add the KS401 to your cart today and keep your day moving.
Frequently Asked Questions
What vehicles can the KS401 jump-start?
A: It's built for 12V systems only, so it won't work on 24V setups. It handles cars, pickups, SUVs, and small engines like lawn tractors. Larger trucks may be more than a 360 cold crank amp pack can start, so check your needs first.
How do I jump-start a vehicle with it?
A: With the ignition off and the unit switched off, connect the red clamp to the positive battery terminal. Then connect the black clamp to the vehicle frame, away from belts and fans. Switch the unit on and start the vehicle. If it doesn't start within 6 seconds, let the unit cool for 3 minutes before trying again. Once running, switch the unit off and remove the negative clamp first, then the positive.
How do I charge it, and how long does it take?
A: Plug the AC cord into the internal charger. A brand-new unit needs at least 30 hours of charging. After that, charge until the display reads Gd.9, then another 3 to 6 hours for maximum output. The internal charger can stay connected indefinitely.
Can it save my vehicle's memory during a battery swap?
A: Yes, in many cases. Use the included 12V DC cord to connect the unit's power port to the vehicle's lighter socket. Some vehicles need the ignition key in accessory mode. Others need an OBD2 connection to hold all memory functions, which requires the MS6209 memory saver, sold separately.
Can I replace the cables or the battery myself?
A: Yes. The 7 ft cables are replaceable (Associated part no. 611403) and so is the battery (part no. 625504). Battery replacement takes a T20 Torx screwdriver and a 3/8" socket. The battery is not covered by the standard warranty, so check Associated's terms before ordering.
