Product Specifications for APCRBCV212 Replacement Battery for APC Back-UPS BVN900M1 and BVN950M1
| BM Part #: | APCRBCV212 |
|---|---|
| Voltage: | 12 Volt |
| Capacity: | 9 Ah |
| Type: | Sealed Lead Acid |
| Length: | 5.94" |
| Width: | 2.52" |
| Height: | 3.74" |
| Shipping Weight: | 6.00Lbs |
| Warranty: | 2 Year |
- Direct Replacement: A drop-in replacement for the original APCRBCV212 battery, designed to fit the APC Back-UPS BVN900M1, BVN900M1-CA, BVN950M1, and BVN950M1-CA exactly as the factory battery did.
- 12V 9Ah Sealed Lead Acid: Matches the original battery's voltage and capacity spec for a full restoration of your UPS's backup runtime — no compromises.
- Easy DIY Installation: No special tools or technical background required. The battery connects with a simple plug, making it an easy swap that most users can complete in just a few minutes.
- Maintenance-Free Design: Sealed and leak-proof, this battery requires zero upkeep after installation — just set it and forget it.
- Cost-Effective Alternative to Replacement: Why buy a whole new UPS when a fresh battery is all you need? Replacing the battery extends the life of your existing unit at a fraction of the cost.
- 2-year Warranty: Backed by an 2-year warranty for added peace of mind with every purchase.
Product Description
Don't Replace Your UPS — Replace the Battery
If the battery in your APC Back-UPS BVN900M1 or BVN950M1 has given up the ghost, the good news is that you don't need to buy a whole new unit. A single fresh battery is all it takes to get your UPS back to protecting your computer, home network, or home office setup. The APCRBCV212 from Battery Mart is built to restore your APC Back-UPS to full working order quickly, easily, and affordably.
A Perfect Match for Your APC Back-UPS
This battery is a direct replacement for the original APCRBCV212, designed specifically to fit the APC Back-UPS BVN900M1, BVN900M1-CA, BVN950M1, and BVN950M1-CA. At 12V and 9Ah, it matches the original factory specification exactly, so you get the same backup runtime your UPS was designed to deliver — enough time to save your work and shut down safely when the power goes out.
Simple Enough for Anyone to Install
You don't need to be tech-savvy to swap this battery. The APC Back-UPS BVN series is designed with user-replaceable batteries in mind, and this replacement follows the same straightforward process. Open the battery compartment, disconnect the old battery, connect the new one, and you're done. No tools needed, no wiring to figure out — most users complete the swap in just a few minutes.
Sealed, Safe, and Maintenance-Free
This is a sealed lead acid battery, which means once it's installed, there's nothing else to do. No fluid levels to check, no venting to arrange, and no risk of leaks. It's a safe, no-fuss replacement that will quietly do its job in the background — exactly the way a UPS battery should.
A Smart, Affordable Choice
UPS batteries typically last three to five years before they need replacing. When that time comes, buying a whole new unit is unnecessary and wasteful when the rest of your UPS is still in great shape. A replacement battery from Battery Mart keeps your existing unit running for years more at a fraction of the cost of a new UPS — and it's better for the environment too.
Backed by an 2-Year Warranty
Every APCRBCV212 from Battery Mart comes with an 2-year warranty covering defects in materials and workmanship. It's our commitment to quality and to making sure your backup power is there when you need it most.
Frequently Asked Questions
What APC UPS models is the APCRBCV212 compatible with?
This battery is compatible with the APC Back-UPS BVN900M1, BVN900M1-CA, BVN950M1, and BVN950M1-CA. If you're unsure whether this battery fits your specific unit, refer to the cross-reference list on the product page or check the model number printed on your UPS.
What are the battery's specifications?
The APCRBCV212 is a single 12V 9Ah sealed lead acid battery measuring 5.94" long x 2.52" wide x 3.74" tall. It is a direct match for the original factory battery used in compatible APC Back-UPS models.
How difficult is it to install this battery?
Installation is straightforward and requires no tools. Simply open the battery access panel on your APC Back-UPS, unplug the old battery, plug in the new one, and close the panel. Most users complete the process in just a few minutes. APC also provides battery replacement guidance in their user manuals and support resources.
Will using a third-party replacement battery void my APC warranty?
In most cases, no — and federal law backs you up on this. Under the Magnuson-Moss Warranty Act, a manufacturer cannot legally void your warranty simply because you used a compatible third-party replacement part, unless they can demonstrate that the part itself caused the issue. Replacing a worn-out battery with a compatible unit like this one is considered normal maintenance and should not affect your UPS warranty coverage. If you have specific concerns, we recommend reviewing your APC warranty terms or contacting APC directly.
How long do UPS batteries typically last?
Most UPS batteries last between three and five years under normal operating conditions, though factors like ambient temperature, how often the battery cycles, and how deeply it discharges can affect its lifespan. If your UPS is beeping frequently, showing a replace battery indicator, or no longer providing the backup time it used to, it's a good sign the battery is due for replacement.
Do I need to do any maintenance on this battery after installation?
No maintenance is needed. The sealed lead acid design is completely maintenance-free. Once installed, the battery charges automatically through your UPS and is ready to deliver backup power whenever you need it.
What warranty does this battery come with?
This battery is backed by an 2-year warranty covering defects in materials and workmanship.
Cross Reference & Compatibility
- APC APCRBCV212
This battery can be used in these models:
- APC BVN900M1
- APC BVN900M1-CA
- APC BVN950M1
- APC BVN950M1-CA
