BatteryMINDer 12V 2/4/8 Amp Charger / Maintainer / Desulfator & Lithium Charger / Maintainer
Item #: 128CEC2 |
In Stock
(1) Read a Review / Write a Review
Specs
Product Specifications for BatteryMINDer 12V 2/4/8 Amp Charger / Maintainer / Desulfator & Lithium Charger / Maintainer
Specifications:
| BM Part #: | 128CEC2 |
|---|---|
| Voltage: | 12 Volt |
| Charging Rate: | 2/4/8 Amp |
| Input Voltage: | 90-140 VAC, 47-63Hz |
| Length: | 4.9" |
| Width: | 7.3" |
| Height: | 2.1" |
| Shipping Weight: | 4.40Lbs |
| Warranty: | 5 Year Factory Direct |
| Product Manual: | Download |
What's in the box:
- Model 128CEC2 Charger-Maintainer-Desulfator
- 6' AC cord, 6' DC cord with quick connector (SAE)
- Auto-Temp Compensation Sensor (Installed)
- Insulated Battery Clip Cord Set with Quick Connector and 15A replaceable fuse
- Ring Terminal Cord Set with Quick Connector and 15A replaceable fuse
- Instruction Manual
Features:
- Guaranteed to never overcharge/undercharge. (33°F to 130°F).
- Push-button Selection for ALL battery types and charge rates.
- Options for Odyssey, PLT, AGM, Gel, and Flooded (filler caps).
- 100% Full - Time U.S. Patented Pulse-type Desulfation keeps battery free of sulfate or dissolves sulfate completely in older batteries.
- Detects and rejects batteries with bad cells.
- Maximizes battery life and capacity. Recovers weak batteries.
- Diagnoses battery's condition / state-of-charge.
- Recovers weak or deeply discharged batteries: including but not limited to flooded filler cap, maintenance-free, valve regulated lead-acid (VRLA), sealed lead-acid (SLA), starter, deep cycle and hybrid.
- Maintains up to 6 batteries at a time. (requires our Y-Connector Item - BM Part # 210AY. Sold separately).
- Auto-Restart after power failure.
- Intrusion protected from water and dust per IEC STANDARD IP65.
- Bad cell detection with auto-shutdown.
- Includes Short circuit, spark, reverse polarity protection, thermal runaway protection, automatic D/C disconnect on A/C failure and quick-connect/disconnect fused alligator clip assembly.
- Very high efficiency. California CEC Approved.
- Automatically detects input AC power.
- ECO-mode with hi-efficiency / low power consumption.
- Ambient temperature compensation. Built-in temperature sensor automatically adjusts charge rate to ensure full-charge. (as low as 0°F or as high as 130°F).
- 18 LED indicators show state-of-charge and status mode / battery condition. Rugged, vibration-resistant construction.
Description
Product Description
BatteryMINDer® Model 128CEC2: 24-Volt 2/4/8 AMP Charger-Maintainer-Desulfator & Lithium Charger Maintainer
The BatteryMINDer 128CEC2 is an all-purpose charger with user-selectable settings for many battery types. It will charge all sealed, wet (filler cap), maintenance-free, AGM, deep cycle, RV, marine, PLT, and Odyssey-branded lead-acid batteries. The 128CEC2 is regulated and will not overcharge, no matter what amp selection you make. It's just a matter of how fast you need to charge the battery.
- If you know the battery is charged and in good shape, use the 2 amp setting.
- If you are charging a large deep cycle battery or multiple batteries, use the 4 amp setting.
- Most situations, you'll use the Wet/AGM/Sealed selection. Use the Odyssey selection on any Odyssey brand battery at the 8 amp setting.
Full feature list:
- Guaranteed to never overcharge/undercharge. (33°F to 130°F)
- Push-Button Selection for ALL battery types and charge rates.
- 100% Full - Time U.S. Patented Pulse-type Desulfation keeps lead acid battery free of sulfate or dissolves sulfate completely in older batteries.
- Detects and rejects batteries with bad cells.
- Maximize battery life and capacity, recovers weak batteries.
- Diagnoses battery’s condition / state-of-charge.
- Recovers weak or deeply discharged batteries: including but not limited to flooded filler cap, maintenance-free, valve regulated lead-acid (VRLA), sealed lead-acid (SLA), starter, deep cycle and hybrid.
- Maintain up to 8 batteries at a time. (requires BatteryMINDer® Y-Connector Accessory 210-AY)
- Auto-Restart after power failure.
- Intrusion protected from water and dust per IEC STANDARD IP65.
- Bad cell detection with auto-shutdown.
- Includes Short circuit, spark, reverse polarity protection, thermal runaway protection, automatic D/C disconnect on A/C failure and quick-connect/disconnect fused alligator clip assembly
- Very high efficiency. California CEC Approved.
- Automatically detects input AC power.
- ECO-mode with hi-efficiency / low power consumption.
- Ambient temperature compensation. Built-in temperature sensor automatically adjusts charge rate to ensure full-charge. (as low as 0°F or as high as 130°F)
- 18 LED indicators show state-of-charge and important status mode / battery condition. Rugged, vibration-resistant construction.
- Never connect two or more batteries together before fully charging each and checking their condition. Failure to fully charge each battery and check their condition can result in a serious safety hazard.
- Not for nickel–cadmium (NiCad), nickel–metal hydride (NiMH) or aircraft batteries.
Related Products
Replaces
Cross Reference
The BatteryMINDer 12V 2/4/8 Amp Charger / Maintainer / Desulfator & Lithium Charger / Maintainer has been cross-referenced to be compatible with or replace these OEM part numbers and models:
12248
128CEC1
Reviews
Customer Reviews
What our Customers are saying
Excellent Unit
by Joe D on February 15, 2023
Worth the extra money to properly maintain your battery, especially on vehicles that do not get used frequently.
Joe D
Virginia
Would recommend to a friend?
Yes
Customers who bought this item also bought
