Product Specifications for NB to F2 Terminal Adapter - Set of 2
|BM Part #:||035025|
|Shipping Weight:||0.01Lbs (0.16 oz)|
|Warranty:||45 Day Return|
|Width of Hole:||0.19"|
- converts Nut & Bolt (NB) wide terminal to 0.250" (F2) wide terminal.
- Width of hole: 3/16" (4.83 mm)
Set of two NB to F2 Terminal Adapters that converts Nut & Bolt (NB) wide terminal to 0.250" (F2) wide terminal. The NB to F2 battery terminal adapters can be used for all Sealed Lead Acid batteries that have slide-on connectors.
Initially when I went to purchase the adapters were advertised as already bent at approx 90 degree angle, which unfortunately resulted in us requesting an RMA for a refund. CS Agent, Ashley, was extremely understanding and helpful. Since then the photo has been updated to show the version they offer.
Even with the hiccup, we will continue to purchase from Battery Mart based on previous experiences.
Made an error when ordering and they made the correction and didn't charge extra shipping! Shipments where very fast! A pleasure doing business with and highly recommend.
As I stated in my original review the product didn't fit. Perhaps in the specifications for the item it could give an inside diameter of the bolt hole size, which as accurately as I can determine is 5mm for those of you who are trying to figure out whether or not it will fit your application. The second reviewer said it fit so there must be different size bolts on these SLA batteries. A bit more info on the size would be all that is needed for a purchase decision. In the end Battery Mart offered to give a refund so they get high marks on customer service. Low marks on product information. Lets see if they add the size info to the specifications tab for the item. Overall I upgrade from a two star to a three star fating.
The title pretty much says everything. I don't know what size battery they made this adapter for but it didn't fit for the 55Ah battery I bought them for. When I pointed this out to Battery Mart they suggested I drill out the hole. I great idea if the adapter was large enough to be drilled but it isn't. A drill bit large enough to accommodate the bolt on the battery would cut the adapter in half. I ended up using an eye hole fitting on the battery wire and bolted directly to the battery instead of clipping to an adapter.