Free Economy ShippingProduct Specifications for Peg Perego 12-Volt Quick Charger (IKCB0082)
| BM Part #: | IKCB0082 |
|---|---|
| Voltage: | 12 Volt |
| Charging Rate: | 3000 mA |
| Shipping Weight: | 1.35Lbs |
| Warranty: | 60 Day Return |
| Charge Time (fast gear discharge): | ~2 hours |
| Charge Time (low gear discharge): | Additional time may be required |
| Overcharge Protection: | Yes - auto-terminates at full charge |
- 2-hour charge time: Fully recharges the IAKB0501 12V 12Ah battery in approximately 2 hours — fast enough to recharge between sessions rather than waiting overnight. (Applies to batteries discharged in fast gear; low gear discharge may require additional time.)
- Official Peg Perego quick charger: Genuine OEM product, calibrated for Peg Perego's 12V sealed lead-acid battery chemistry. Not a generic replacement.
- 3A output: Delivers approximately three times the charge rate of the standard MECB0086U charger — the difference between waiting overnight and waiting two hours.
- Same connector, no modifications: Plugs directly into the same charging port as the standard charger. Compatible with all Peg Perego 12V vehicles made after 2001.
- Built-in charge termination: Stops automatically at full capacity and confirms via indicator light — no risk of overcharging when used as directed.
- Also known as IKCB0081: Same quick charger, earlier part number. If your vehicle documentation references IKCB0081, this is the current equivalent.
Product Description
The Peg Perego IKCB0082 is the official 12-volt quick charger for the IAKB0501 blue battery. Where the standard MECB0086U charger takes 12 to 13 hours to fully recharge the IAKB0501, the IKCB0082 does it in about 2 hours — the right choice for active riders who burn through a charge in a single session and can't wait overnight to ride again.
When overnight charging isn't fast enough
The standard 12V charger works well for most families — plug in at night, ready by morning. But for kids who ride hard and often, a depleted battery mid-afternoon means a long wait until the next day. The IKCB0082 changes that. At 3A output, it delivers roughly three times the charge rate of the standard charger, bringing a flat IAKB0501 back to full capacity in about two hours. That's fast enough to recharge during lunch or a school pickup and be ready for an afternoon session.
One important detail about charge times
The two-hour charge time applies to batteries that have been depleted through use in high speed (fast gear) operation. If the battery has been discharged through low gear operation — where the motor draws current more slowly over a longer period — the battery may require additional time beyond two hours to reach a complete charge. This is normal behavior for quick chargers with sealed lead-acid batteries. The indicator light will confirm when charging is complete regardless of how long it takes.
The same official compatibility as the standard charger
The IKCB0082 is compatible with all Peg Perego 12V vehicles that use the IAKB0501 blue battery — John Deere tractors and Gators, Polaris ATVs, Ducati motorcycles, Case IH models, and more. It connects to the same charging port used by the standard MECB0086U charger, so no modifications are needed. If your vehicle accepts the standard charger, it accepts this one too.
Standard vs. quick charger: which do you need?
Both chargers are safe for regular use with the IAKB0501 battery. The right choice depends on how your family uses the vehicle:
- Standard charger (MECB0086U) — Best for most families. Charge overnight, ride the next day. Gentler charge rate; some owners prefer it for long-term battery maintenance.
- Quick charger (IKCB0082) — Best for frequent, active riders. Recharges in about 2 hours. Useful when the vehicle sees multiple sessions per day or when you want a second spare battery cycled quickly.
Many families keep both — using the quick charger for same-day recharges and the standard charger for routine overnight maintenance.
A note on part numbers
The IKCB0082 is the current production part number for Peg Perego's 12V quick charger. It may also be referenced as IKCB0081 in some older listings — both numbers refer to the same quick charger at different points in production.
Frequently Asked Questions
Which battery does this charger work with?
The IKCB0082 is designed for the Peg Perego IAKB0501 12V blue battery — the battery used in all Peg Perego 12V ride-on vehicles. It is not compatible with 6V batteries (which use the MECB0085U) or 24V batteries (which use the MECB0111). Always match charger voltage to battery voltage before connecting.
How is this different from the standard MECB0086U charger?
The IKCB0082 outputs 3A and charges the IAKB0501 in approximately 2 hours. The MECB0086U outputs ~900mAh and takes 12 to 13 hours for the same battery. Both are official Peg Perego chargers and both are safe for regular use with the IAKB0501. The quick charger is the right choice when you need the battery ready the same day; the standard charger is the right choice for routine overnight charging.
Why does the 2-hour claim say "fast gear operation only"?
Peg Perego's 12V vehicles typically have at least two speed settings. In fast gear, the motor draws higher current and depletes the battery relatively quickly — the resulting discharge pattern allows the quick charger to restore full capacity in about 2 hours. In low gear, the motor draws lower current over a longer period, which creates a different discharge pattern that may require additional charge time beyond two hours to fully restore. This is a characteristic of sealed lead-acid battery chemistry, not a flaw in the charger. The indicator light will show green when charging is complete regardless of how long the session takes.
Can I use this charger for everyday charging instead of the standard charger?
Yes — the IKCB0082 is designed for regular use and is safe for the IAKB0501 battery when used as directed. Some owners prefer to use the standard charger for routine overnight maintenance and reserve the quick charger for same-day recharges. Either approach is fine. What matters most is that you're using a genuine Peg Perego charger rather than a generic alternative.
Is it safe to leave the quick charger connected after the battery is full?
The IKCB0082 includes automatic charge termination — it stops delivering current once the battery reaches full capacity and the indicator light confirms this. That said, quick chargers at higher output rates are not designed for extended float charging. Once the indicator shows a full charge, unplug the charger. This is especially important with a 3A charger — leaving it connected significantly beyond a full charge can reduce battery capacity over time.
What's the difference between the IKCB0081 and IKCB0082?
They are the same charger produced at different points in time under different part numbers. Peg Perego has updated part numbers across their accessory lineup over the years without changing the underlying product. If your vehicle documentation or a previous purchase references IKCB0081, the IKCB0082 is the correct current replacement.
Should I remove the battery from the vehicle to use this charger?
No. Like the standard charger, the IKCB0082 connects to the vehicle's dedicated charging port, which routes directly to the battery inside. There is no need to open the battery compartment or disconnect the battery harness for routine charging.
Customer Reviews
Definitely worth the purchase! Charges my grandkids Perego Tractor in a 1/3 of the time it takes the charger supplied with the rideon!
My 6 year old grandson says this new battery charges his tractor much faster than the old one.
He is very pleased with its performance
