OptiMate MONITOR O-124, Permanent Battery Lead with Integrated Battery Status for 12V Lead-acid
Item #: O-124 |
In Stock
Be the first to Write a Review

Specs
Product Specifications for OptiMate MONITOR O-124, Permanent Battery Lead with Integrated Battery Status for 12V Lead-acid
Specifications:
BM Part #: | O-124 |
---|---|
Length: | 2.2" |
Width: | 2.2" |
Height: | 6.1" |
Shipping Weight: | 0.31Lbs (4.96 oz) |
Warranty: | 3 Years Factory Direct |
Features:
- Weatherproof permanent battery lead with state of charge monitor for the 12V lead-acid battery in your parked powersport vehicle - 24/7 battery status at a blink of an LED!
- SAE quick connect charge port for charging battery when needed!
- 2 automatic Modes - Battery charge level monitor (single LED blink mode) & Charging system test (arrow mode).
- Vehicle storage: 4 LEDs cover 'full to empty' voltage range of all 12V batteries, including higher voltage AGM for power sport (4th √√LED ≥ 12.7V ). LED matching charge level blinks every 3 seconds (long term draw less than 0.2mA).
- Vehicle running: LED arrow mode activates when charge voltage reaches ideal charging voltage: up to minimum 13.5V (√ green LED) or ideal range 14V+ (√√ green LED).
- With M6 / 1/4" - M8 / 5/16" ringlets that perfectly fit your powersport battery terminals, and 15A fuse that protects the -40°C rated cable and electronics - Premium quality!
Description
Product Description
Confirm if the vehicle charging system is working or battery is charged & provide emergency roadside light, powered via your permanent battery lead or an optional BIKE / AUTO socket accessory.
LENGTH: 24".
BATTERY CONNECTOR: 1/4" (M6) / 5/16” (M8) ringlets.
CHARGE CONNECTOR: 2-pin SAE, protected from dirt and liquid with rubber sealing cap and shroud.
CABLE RATING: 18AWG (0.82mm2) SPT-2W.
FUSE:15 Amp.
USE: -40°F very low temperature, remains flexible at 'below freezing' temperatures.
STYLE: Fully enclosed electronic circuitry with 4 LEDs, SAE charge connector with rubber sealing cap & shroud.
Reviews