Product Specifications for Start-All Lithium-Ion Jump Starter & Power Pack
| BM Part #: | JP-12-2500 |
|---|---|
| Capacity: | 58 Wh |
| Type: | Li-Ion |
| Length: | 8.5" |
| Width: | 3.5" |
| Height: | 9.5" |
| Shipping Weight: | 5.40Lbs |
| Warranty: | 1 Year |
| Joules: | 18800 |
| Amps: | 2500 Amps (<200ms) |
| Lifetime Performance | Up to 5000 Starts |
| Gas Engine: | Up to 8.0L |
| Diesel Engine: | Up to 6.0L |
What's in the box:
- JP-12-2500 Jump Starter with clamps
- 18V 100-240VAC Wall Charger
- 3-in-1 USB adapter for mobile devices.
- User Manual, warranty guide, and quick reference card.
- 4-in-1 functionality: Jump starter, AC power outlet, USB charger, and emergency light.
- Jumpstarts gasoline engines up to an 8.0L and diesel 6.0L with an impressive 2500 amps and 18800 joules. Never be stranded again!
- Four (4) USB ports to charge any USB device, including cell phones, digital cameras, tablets, and gaming devices with multiple power ports.
- Powers mobile equipment such as laptop or tools with convenient AC plug (200W continuous).
- Provides 500 lumen LED emergency lighting with SOS and strobe emergency functions.
- Lightweigt at only 4.4lbs.
- Safety features, including reverse polarity, low voltage, short circuit, over temperature, over discharge, open circuit, spark protections.
Product Description
The most powerful jump starter in its class.
This lightweight lithium-ion jump starter and power pack is for use on autos, boats, and other vehicles. It can jump start gas engines up to 8 liters, and diesel engines up to 6 liters. It features four USB ports, a 120V power outlet, and 12V DC power outlet for powering all sorts of mobile and electronic devices. The bright 500 lumen LED work light provides high-powered emergency lighting with SOS and strobe function.
The Start-All jump starter and power pack delivers maximum starting ability with the most battery capacity and initial starting power available.
Quickstart Guide:
STEP ONE
Fully charge unit.
STEP TWO
Secure unit with safety strap through top handle and place unit on flat surface before use.
STEP THREE
Connect the clamps: Red clamp (+) to Positive terminal and Black clamp (-) to Negative terminal.
STEP FOUR
Turn the main Start-All power switch to the "ON" position and make sure the ignition key is in the first position. When you get a Green "8" on the LED, the cables are active and you may start the engine.
STEP FIVE
Once the engine is started, turn off the Start-All and remove the clamps from the vehicle battery, and store the unit.
STEP SIX
Recharge unit after 6 months of no use.
