Product Specifications for Cliplight 6/12 Volt 1.5 Amp Battery Charger
|BM Part #:||OEM-61201-5|
|Voltage:||6 / 12 Volt|
- For charging lead-acid batteries.
- Fully automatic: Can be left connected without overcharging.
- LED display keeps you up-to-date on battery charge.
- Selectable 6V/12V switch.
- Can be mounted onboard for convenient charging.
Order today and receive free standard shipping on your Cliplight 6/12 Volt 1.5 Amp Battery Charger. Only valid in the contiguous 48 states and not valid with any other offer. Physical address required (No PO Boxes).
6 volt or 12 volt, 1.5 amp (Selectable) fully automatic battery charger for use in applications from charging to maintaining small to medium sized batteries commonly used in; U.P.S. systems, storage of larger batteries, small mobility batteries, other non-seasonal and cold weather maintenance.
OUTPUT: 12 Volts DC Nominal; 1.5 Amp DC Or 6 Volts DC Nominal; 1.5 Amp DC
INPUT: 120 Volts AC, 0.28Amps, 60 Hz
DIMENSIONS: W 4.88" x D 3.6" x H 1.76" 12.2 cm x 9 cm x 4.4 cm (without flange and cable strain relief)
- AC Cord: 6 foot
- DC Cord: 4 foot
- Ring terminal and clamp harness: 2 foot
FEATURES BI-COLOUR LED DISPLAY: The first bi-coloured LED indicates yellow for 6 volt batteries and red for 12 volt batteries, the AC must be present. The second LED (yellow) indicates the charger in charge mode. The third and last bi-coloured LED indicates green when the charger reaches the float stage. The LED's will not illuminate without AC present.
Accessories Included: Includes clamp harness and lug harness with 7.5 Amp Fuse. (Both include weather pack connections) Metal Mounting Bracket
BATTERY TYPES: Selectable via a switch for 12 volt or 6 volt lead-acid batteries. Recommended for charging batteries under 30Ah and maintenance of batteries larger than 30Ah.
FULLY AUTOMATIC: Can be left connected to the battery indefinitely (only limited by life of battery) without overcharging.
BACKUP PROTECTION: Reverse battery, short circuit, input overload, and over temperature.
CHARGE PROFILE: 3 stage/level charge algorithm allows battery to reach its optimum charge while prolonging their life. Unit shuts down when battery is fully charged and automatically powers on when needed.
REVERSED CONNECTION: The third LED is red when batteries are connectedin reverse.
AGENCY: UL & CuL available upon request
1 Year Warranty
Good charger and battery tender. I bought it to charge my grand kids ride-on toys. It did fine. Make sure to look at the bottom where the 6V/12V switch is. It took me a few minutes to find it. It has overload protection so you can't make a mistake. The LED indicators work well once you figure out how they work. Nice product.
We use this unit on residential & commerical gate openers,charges a 12volt battery along with solar panel.
Does what it is suppose to do and does well
To keep the battery on my Harley charged. It is not used much, which causes a drain on the battery from the stereo. This way when it is time to go!!! It is ready....
- 6V 1.5A
- 6Volt 1.5Amp
- 12V 1.5A
- 12Volt 1.5Amp