Product Specifications for 6N6-3B-1 Dry Charge Battery: Acid Required
| BM Part #: | 6N6-3B-1 |
|---|---|
| Voltage: | 6 Volt |
| Capacity: | 6 Ah |
| Type: | Dry Charge |
| Length: | 3.88" |
| Width: | 2.25" |
| Height: | 4.38" |
| Cold Cranking Amps: | 48 CCA |
| Shipping Weight: | 5.00Lbs |
| Warranty: | 6 Months |
Product Description
- 6 Volts
- 6 Amp Hour @10 hr rate
- 0.6 Ah Charge Current
- 48 CCA
- Ships without acid which can be purchased at most large auto parts stores
- New bolts included
Note: Please check dimensions and terminal configuration to ensure this is the proper battery for your application.
Off-Season Maintenance:
We recommend the below charger to maintain this battery when it is not in use.
Cross Reference
Customer Reviews
Put this in a 1983 Yamaha XT250. Fit perfect. The battery contacts are on the correct sides and the overflow was in the same location. Battery on this bike acts more like a voltage regulator. So it isn't stressed much.
Good deal, just what I ordered, delivered as I expected
I use the batteries for my motorcycles. I will buy all my specialty batteries for this company.
it is a good value
Loved the email they sent me before shipping, asking if I wanted to get acid as well... good customer service skills for sure!
This works so well I am considering the 12V model for another application I have. I use this product to run an old 6V spotlight from an antique American LaFrance fire engine. I have it mounted on a metal box to use as an emergency light when the power goes out. I had been using 2 6V lantern batteries wired in parallel, but I wasn't getting enough amperage. This product did the trick beautifully.
