Safe, No Spark Charging! Deltran's advanced SuperSmart Battery Tender Battery Management System is light years ahead of any standard battery charger. It's the first fully automatic, constant-current 6/12 volt battery charger designed to charge and/ or maintain up to 10 6/12-volt batteries simultaneously @ 4 amps.
This Multiple Charging Station Shop Charger uses 10 independent Battery Tender Plus battery charger circuits in a single enclosure. Each circuit is a linear power converter that has a true DC output at a maximum power level of approximately 29 watts. It has a maximum output charging current of 4.0 amps. This is a higher current output than the stand-alone Battery Tender Plus battery charger circuits because each shop charger has an internal fan to provide forced air cooling of all active, semiconductor components.
Tech Tip: Using A Multi-Bank Charger
Each bank of this charger is 4 amps. Combined, this is an output of 40 amps (10 banks of 4 amps each). This is commonly used in two ways:
- Connect each bank to separate battery systems, charging both by 4 amps each.
- Connect all banks to the same battery system, charging it by 40 amps total.
GREAT UNIT IF YOU HAVE LOTS OF TOYS IN ONE BIG GARAGE. I LOCATED MINE CENTRALLY AND RAN LEADS TO 6 CARS & 4 MOTORCYCLES
We now have four of these units in service at our car plant where we used to have old manual chargers. These new ones completly take the guesswork out of which batteries will take a charge, which are still in the charging process, and which need to be sent back for refund.
This charger is used to keep batteries for our automated target systems charged. It is extremely easy to use and charges faster than a higher powered system we have from another manufacturer. We will be purchasing several more of these chargers in the near future
I sell batteries, so I use it all the time and is excellent!!
Works Great can charge up to 10 batteries at a time. Wish it had a manual switch to charge batteries with less than 3 volts.