This Dual Bank Ship ’N Shore model is the perfect answer for multiple marine capabilities. With two sets of output cords, this unit can charge 2 separate 12 volt batteries at the same time at a “true” 10 amp charge rate or a single 12 volt battery at a “true” 20 amp charge rate. Ignition protected, non-sparking, battery connection leads make it safe to recharge, even on board.
- Microprocessor Controlled, Fully Automatic, Multi-Stage Charging System with Float-Mode Monitoring -- Charges and then maintains the battery when fully charged. Resumes continuous charging when battery becomes discharged.
- TRUE 10-amp Charge: for a single 12-volt battery or two 12-volt batteries in a two-battery, 24-volt system.
- TRUE 20-amp Charge: for single 12-volt battery.
- Dedicated Microprocessor: for each independently controlled bank.
- Electrically Independent Outputs: handle 12 or 24-volt systems.
- Reverse Hookup Protection: helps protect charger and battery.
- Desulphation Mode: attempts to recover sulphated batteries.
- Waterproof Construction, UL Marine Listed: Do not submerse in water.
- AC Line Compensation: for those varying line voltages of 107 to 127 volts.
- Faster Charge: maintains higher charging rate than most linear chargers (Not recommended for eye-type batteries).
- Ignition Protected, Non-Sparking Battery Connection Leads: make it safe to recharge on board.
- Short Circuit Protection: non-live ring lug connectors sense battery voltage before activating for greater safety.
- Over Current Protection: output cords have 30-amp fuse built in.
- LED Indicators: easy-to-read, 4 per channel.
- No Switches or Buttons to Change: sense automatically for easy charging and maintaining.
- 6-ft. Out Cords with Fuse and Ring connectors and AC Cord: combine for a 12-ft. maximum reach.
- Durable Polypropylene Case and Baked Enamel, Coated Aluminum, Rust-Proof Base: for a long product life.
|
