Charges wet batteries, gel batteries, maintenance free batteries, and AGM batteries
Rated at IP44
ETL approved for USA and Canada
Free Standard Shipping
Order today and receive free standard shipping on your NOCO Genius 12/24 Volt, 26 Amp Multi-Purpose Battery Charger. Only valid in the continental 48 states and not valid with any other offer. Physical address required (No PO Boxes).
The G26000 is a smart, 15 Step, fully automatic switch-mode battery charger and maintainer. The G26000 restores batteries to their original capacity, recovers slightly sulfated batteries, charges batteries in cold climates, rescues drained batteries, and provides maintenance charging to increase battery life. A powerful battery charger with specialized charging modes for recovering severely drained batteries that will not accept a normal charge and the ability to perform an equalization charge. The G26000 comes equipped with a remote temperature probe for optimized charging performance. Suitable for most 12V and 24V battery capacities from 25-500Ah, such as Motorcycles, ATVs, UTVs, Snowmobiles, Jet Skis, Cars, RVs, Boats and Trucks.
Powered by NOCO VosFX Processor
The VosFX Processor is a revolutionary smart processor utilizing sophisticated levels of intelligence to alter the charge process, based on organic feedback from the battery, to extend battery life. The VosFX Processor quickly and efficiently makes decisions on how to charge the battery without risking user safety or damage to the battery.
Wicked Smart Features:
12V/24V Compatibility Charges 12V and 24V batteries
Auto-memory Returns to last selected mode when restarted
Fully Interactive Automatically adjusts itself to changing current needs
Designed for Safety Reverse polarity, short circuit, open circuit, spark proof, overheat, overcurrent, and overcharge
Step 1: Diagnostics Checks the battery voltage to make sure battery connections are good and the battery is in a stable condition before beginning the charge process.
Step 2: Recovery Initializes the Recovery process, if needed, for deeply discharged or sulfated (desulfation) batteries by pulsing small amounts of current.
Step 3: Soft Start Begins Bulk charging process with a gentle (soft) charge.
Step 4-7: Bulk The Bulk charging process continues using Max Rate, High Rate, Medium Rate and Low Rate charges and returns 80% of battery capacity, indicated by the 25%, 50% and 75% CHARGE LEDs.
Step 8: Absorption Brings the charge level to 90%. The battery charger will deliver small amounts of current to provide a safe, efficient charge and limit battery gassing.
Step 9: Trickle Battery is fully charged and ready to use, indicated by the 100% CHARGE LED being a solid Green. In this step, the battery charger will only deliver enough current to keep the battery full. If the battery tells the charger that more current is needed, the battery charger will switch to Maintenance.
Step 10: Maintenance Continuously monitors the battery voltage to determine if a Maintenance charge should be initiated. If the terminal voltage falls below 12.8V (12V) and 25.6V (24V), the charger will start the Maintenance cycle until voltage reaches 14.4V (12V) and 28.8V (24V) and then discontinues the charge cycle. The cycle between Trickle and Maintenance is repeated indefinitely to keep the battery at full charge, without overcharging. The battery charger can be left connected indefinitely.
Step 11: 13.6V Supply The 13.6V SUPPLY mode is used for low voltage batteries, maintenance charging or as a power supply.
Step 12: 13.6V Equalization The 13.6V EQUALIZATION is used to provide an equalization charge by delivering a constant voltage of 13.6V.
Step 13: Silent Night The SILENT NIGHT is used to provide quiet operation by reducing the charging current to 5A (5000mA) and disabling the internal cooling fan.
Step 14: 16V Boost The 16V BOOST mode is used to recover battery capacity from a stratified (sulfated) battery by applying a specialized high 16.5V (17V Max) voltage to soften and melt down sulfate from the battery plates so that the material becomes usable again.
Step 15: 32V Boost The 32V BOOST is used to recover battery capacity from a stratified (sulfated) battery by applying a specialized high 33V (34V Max) voltage to soften and melt down sulfate from the battery plates so that the material becomes usable again.
Estimated Shipping Calculator:
This tool will provide a quick estimate of your shipping costs.
Customers who bought this item were also interested in: