Product Specifications for DR202I SMBus Smart Battery | 10.8V 7800mAh for Philips, Spacelabs, TSI & More
| BM Part #: | DR202I |
|---|---|
| Voltage: | 10.8 Volt |
| Capacity: | 7800 mAh |
| Type: | Li-Ion |
| Length: | 5.88" |
| Width: | 3.50" |
| Height: | 0.78" |
| Shipping Weight: | 1.00Lbs |
| Warranty: | 1 Year |
- Broad cross-industry compatibility — medical, scientific, satellite, and field test equipment — replaces SM202, Li202SX, ME202, NBP001xxx, SSB-series, STD202S, and dozens of related OEM part numbers across Philips, Spacelabs, TSI/AeroTrak, Hughes, Anritsu, Samsung, and compatible platforms
- SMBus smart battery with Texas Instruments BQ40Z50 chipset — full smart battery communication including state-of-charge, cycle count, and health reporting; ships fully tested, programmed, and calibrated for immediate deployment
- Integrated LED fuel gauge indicator — visual charge status check independent of host device; useful for pre-use verification on medical monitors, particle counters, and field instruments
- 9-cell high-capacity design: 10.8V 7800mAh / 84Wh — high-capacity 9-cell pack with 5A maximum discharge rate; primary and secondary circuit protection; injection-molded UL94-rated ABS housing with sonic weld construction
- Designed and assembled in the USA; 12-month warranty — ships fully tested, programmed, and calibrated; backed by a full one-year warranty
Product Description
2DR202I SMBus Smart Battery — SM202 / Li202SX / ME202 Platform
The DR202I is a 10.8V 7800mAh Lithium-Ion SMBus intelligent battery pack designed and assembled in the USA by Energy+. It serves as a replacement for one of the most widely deployed smart battery platforms across medical, scientific, satellite, and field test equipment — covering part number families including SM202, Li202SX, ME202, NBP001xxx, SSB-series, and many others. It ships fully tested, programmed, and calibrated for immediate deployment without additional bench setup.
Compatible Equipment by Category
Philips Patient Monitors & Vital Signs
- Philips Goldway: G50, G60, G70, G80
- Philips Suresign: VM3, VM4, VM6, VM8, VS2, VS3
Spacelabs Medical Monitors
- Spacelabs: mCare300 (91220), mCare300D, Monitor ELANCE, ELS5
TSI / AeroTrak Particle Counters & Air Quality Instruments
- TSI: 6530-02, 8240, 9110, 9130, 9130-02, 9310-01, 9310-02, 9350, 9350-01, 9500, 9510, 9510-01, 9510BD, 9530-02, 9550, 9550-01
- AeroTrak: APC 9510-02
- TSI DustTrak: DRX 8530, DRX 8530EP, DRX 8533, DRX 8533EP, DRX 8534, II 530EP, II 8532
Satellite & Field Communications
- Hughes: 9201, 9201 BGAN satellite terminal
Anritsu / Acterna Test Equipment
- Anritsu: CMA-4500, CMA 4000 OTDR, CMA4000i OTDR
- Acterna: MTS-8000
Legacy Samsung Laptops
- Samsung: P25, P28, P29, V20, X500, V100, V200, V1010, S400 series
Confirm your equipment model and OEM battery part number against your documentation before ordering. The replaces list below covers all known compatible part numbers — if your part number appears, the DR202I is the correct replacement.
SMBus Smart Battery Technology
The DR202I uses a Texas Instruments BQ40Z50 SMBus chipset, providing full smart battery communication to compatible host equipment. This includes accurate state-of-charge reporting, cycle count tracking, and state-of-health data. An integrated LED fuel gauge indicator allows visual charge verification independent of the host device. The 5-position 146845-1 connector is consistent with the SM202/Li202SX platform standard.
Construction and Safety
Built with 9 high-performance Li-Ion cells delivering 10.8V at 7800mAh (84.24Wh) with a 5A maximum discharge rate. Primary and secondary circuit protection is included. The injection-molded UL94-rated ABS housing with sonic weld construction matches OEM build quality standards.
Frequently Asked Questions
What equipment is the DR202I compatible with?
The DR202I covers a broad range of equipment including Philips Goldway and Suresign patient monitors, Spacelabs mCare300 and ELANCE monitors, TSI and AeroTrak particle counters and DustTrak air quality instruments, Hughes BGAN satellite terminals, Anritsu CMA-series OTDR instruments, Acterna MTS-8000, and legacy Samsung P/V/X-series laptops. See the full compatible equipment list above.
What is the SM202 / Li202SX battery platform?
The SM202 and Li202SX are widely used smart battery platform designations adopted by multiple OEMs across medical, scientific, and field test equipment categories. The DR202I is designed to replace all major variants of this platform, including ME202 series, NBP001xxx series, SSB-series, STD202S, and many others.
Does this battery require programming before use?
No. The DR202I ships fully tested, programmed, and calibrated. It is ready for immediate installation without additional bench programming or calibration.
Is the DR202I compatible with Philips IntelliVue monitors?
The DR202I covers Philips Goldway and Suresign series monitors via the ME202 and 989803144631 part number family. For Philips IntelliVue MP and MX series monitors, see the DR202P, which is specifically designed for that platform using the M4605A connector standard.
Is this an OEM battery?
No. The DR202I is an aftermarket replacement battery manufactured by Energy+ in the USA. It is not an official product of Philips, Spacelabs, TSI, Hughes, Anritsu, or any other OEM whose equipment it is compatible with.
What is the warranty?
The DR202I carries a 12-month warranty.
How does the DR202I differ from the DR202P?
Both batteries share the same voltage (10.8V) and capacity (7800mAh), and are physically similar in size. The key difference is connector and platform: the DR202P uses the M4605A platform connector for Philips IntelliVue MP/MX series monitors, while the DR202I uses the 146845-1 connector for the SM202/Li202SX platform covering Philips Goldway/Suresign, Spacelabs, TSI, and other equipment families.
Cross Reference & Compatibility
- 146-0127-00
- 1588-3366
- 234960-001
- 503430-501
- 503468-001
- 504030-027
- 6012P
- 90-0100-0020
- 9760035
- 989803144631
- 989803144631
- BA-9250
- BA9250
- BAT-ST202S
- CE-BL01
- CEBL01
- DR-202I
- DSO002576
- DSO002576-00
- GPDR202
- IP202
- LDU-202
- LDU202
- Li202S
- Li202S-60
- Li202S-66
- Li202S5400
- LI202SX-7200
- LIP9020B
- ME202AF
- ME202AH
- ME202C
- ME202CJ
- NBP001197
- NBP001197-00
- NBP001254
- NBP001254-00
- NBP001276
- NBP001276-00
- NBP001280
- NBP001280-00
- NBP001285
- NBP001285-00
- NBP001305-00
- NI2020
- SB200L
- SM202
- SMP-202S
- SMP2020
- SMP2020D
- SMP2020P
- SMP202S
- SSB-500EL
- SSB-650ELS
- SSB-830ELS
- SSB-830ELS/E
- SSB-950ELS
- SSB-950ELS/E
- SSB-P28LS6
- SSB-T10CLS
- SSB-T10CLS/E
- SSB-V20CLS
- SSB-V20CLS/E
- SSB-V20KLS
- SSB500EL
- SSB650ELS
- STD202S
- TH202
This battery can be used in these models:
- Spacelabs ELS5
- Spacelabs mCare300
- Spacelabs mCare300D
