Specs
Product Specifications for 3 Volt 2200 mAh Lithium PLC Battery
Specifications:
| BM Part #: | LITH-46 |
|---|---|
| Voltage: | 3 Volt |
| Capacity: | 2200 mAh |
| Type: | Lithium |
| Shipping Weight: | 0.60Lbs (9.6 oz) |
| Warranty: | 60 Day Return |
Description
Product Description
This is 1 cell lithium battery designed for Le Blonde 77 CNC router and GE Fanuc CNC 21i series programmable logic controller industrial computers.
Low self discharge rate gives this cell a 10 year shelf life.
Stable voltage broad temperature range (-40°C to +85°C).
Replaces:
A02B-0200-K102, A02B0200K102, A98L-0031-0012, A98L00310012, CR17540SE-RL
Replaces
Cross Reference & Compatibility
The 3 Volt 2200 mAh Lithium PLC Battery has been cross-referenced to be compatible with or replace these OEM part numbers and models:
CR17450E-RL
CR17450SE
CS-FN200SL
LCPLC-704
LITH-46
PLC-CR17450E-RL
OEM
- Fedco CR17450E-RL
- GE Fanuc A02B-0200-K102
- GE Fanuc A98L-0031-0012
- Interstate A55DELTA
- Interstate LIT5110
- Leblond CR17450E-RL
- Leblond CR17450SE-R
- Sanyo 17450ER-CX
- Sanyo CR17450SE-R ( 3V )
This battery can be used in these models:
PLC / Programmable Logic Control
- Fuji CR8-LHC
- GE Fanuc A028B-0236-K102
- GE Fanuc A02B-0118-K111
- GE Fanuc CNC Series 0i-B / 0i-Mate-B
- GE Fanuc CNC Series 0i-D (Stand-Alone)
- GE Fanuc CNC Series 15-B, 15i-A, 15i-B
- GE Fanuc CNC Series 16/18-B
- GE Fanuc CNC Series 16/18-C
- GE Fanuc CNC Series 16i/18i/21i-A
- GE Fanuc CNC Series 16i/18i/21i-B
- GE Fanuc CNC Series 20i-A, 20i-B
- GE Fanuc CNC Series 30i/31i/32i-A
- GE Fanuc CNC Series 30i/31i/32i/35i-B (Stand-Alone Type)
- GE Fanuc CNC Series Power Mate iD
- GE Fanuc CNC Series Power Mate iH
- GE Fanuc CR17450ER-CA029
- GE Fanuc Digital Servo Adapter (DSA)
- GE Fanuc FC200201
- GE Fanuc PANEL i (Industrial PC)
- GE Fanuc Power Motion i-A (Stand-Alone Type)
- Komo 100722-00
- Leblond Model 77 CNC Router
- Milacron 5248383
Reviews
