Product Specifications for 12 Volt 3.2 Ah Sealed Lead Acid Rechargeable Battery - F1 Terminal
|BM Part #:||SLA-12V3-4|
|Type:||Sealed Lead Acid Battery|
- F1 Terminals (3/16" wide)
- Rechargeable, recyclable, and no memory effect.
- Sealed, maintenance free with a long service life. Built to last in the roughest situations.
- 1 Year Warranty
Note: Manufacturers change battery specifications without notice. Please inspect your old batteries to verify the quantity needed, terminal and battery sizes.
Brand New First Quality Factory Direct
Sealed Maintenance Free
The valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle".
Long Service Life
A dependable service life can be expected under normal operating conditions.
Long Shelf Life
Low self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life.
Wide Operating Temperature Range
May be discharged over a temperature range of -40 °C to +60 °C (-40 °F to +140 °F), and charged at temperatures ranging from -20 °C to +50 °C (4 °F to +122 °F).
The high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat.
- Length 5.29 in.
- Width 2.68 in.
- Height 2.53 in.
- Terminal F1 (3/16")
- 1 Year Warranty
works like it should...good value...
The only difficulty I had was wading through all choices
until I found a picture of a battery that had the exact stock number on it.
I bought this to replace the OEM battery in my APC 350 Back Up UPS. I has worked just fine as a replacement battery.
I bought this battery as your website showed it to be the replacement battery for the UPS I needed it for. It turned out to be the wrong size, was too long to fit in the UPS. Since it partially fit in the UPS I was able to connect it and it works but the UPS now sits on top of it and the bottom cover to the UPS is in a drawer.
Exactly the battery I needed and fast turn around.