IMPORTANT!! All Aviation specific BatteryMINDer models are designed exclusively for use with either SEALED (AGM-non liquid) or Flooded (liquid w/ filler caps) as manufactured by Concorde, Gill and EnerSys (Odyssey, Hawker) for use on non-commercial aircraft specifically approved by FAA and/or PMA. ALL these types, regardless of manufacture are based on LEAD-ACID chemistry, NOT Nickel Cadmium, Nickel Metal Hydride, or any other chemistry-construction. If you have any doubt about the battery you intend to use with any of the BatteryMINDer products, please confirm these facts with the maker of your particular battery type.
BatteryMINDer 12248-AA-S3 Odyssey-Specific Aviation Charger / Maintainer / Desulfator-Conditioner
VDC Electronics now has available a Odyssey-Specific Plug 'n Run Aviation Specific versions of its 12-V Maintenance Charger - De-Sulfator - Conditioners. For use on the following Odyssey types: SBS-J16 FAA-PMA, PC310, PC535, PC545, PC625, PC680. May be used as a Maintainer for larger series Odyssey such as PC925, PC1200, PC1230, PC1400. Requires proper installation of Battery Temperature Sensor (included. Designated as the 12-V model 12248-AA-S3 (Aviation Specific), it is similar to model 12248-AA-S1 except for its Plug ‘n Run feature, eliminating the need to set neither the output current nor battery type, before operating. This feature is of particular importance if any person, unfamiliar with the setting requirements, is involved in maintaining the battery.
The model include full-time pulsed de-sulfation circuitry designed to safely dissolve sulfation build-up on the battery's storage plates, restoring lost cranking power and extending life. BatteryMINDer's de-sulfation method is fully automatic, does not use potentially damaging high voltage.
Features
- For all size and type 12-Volt aviation batteries including sealed AGM-maintenance-free and filler cap maintenance type
- Instant alternator condition at the push of a button.
- Guaranteed never to over-charge, regardless of time or temperature (32°F - 125°F) with correct battery type setting and ABS-248 temperature sensors correctly installed on either battery terminal connection
- Auto-restart after power failure
- Safely charges up to 200% faster than conventional chargers
- Maintains from 1 - 6 batteries at a time (parallel connected)
- Automatically dissolves power-robbing sulfation using safe low voltage pulse technology (U.S. Patented)
- Microprocessor controlled pulsed output ensures 100% full charge
- Temperature compensation extends battery life by more than 200 Cycles (full charge-discharge cycles) with ABS temperature sensor
- High efficiency design = low monthly operating cost of less than 50 cents
- Weather-proof enclosure
- 12 volt PowerPlug (fused) allows charger to be easily connected to battery via input 12 v power receptacle
- 1 year 100% money-back guarantee + five (5) year "no hassle" warranty
|
